Home / Articles / What is Routing? Automate Your Routing Pipework with SOLIDWORKS

What is Routing? Automate Your Routing Pipework with SOLIDWORKS

SOLIDWORKS Routing is an add-in that allows you to completely automate the process of routing pipework, tubing or even cabling, saving you many hours of modelling against traditional methods. Sound interesting?

SOLIDWORKS Routing

In this article we want to show you the benefits of using this package. We know that projects often have tight deadlines so saving time at any stage can take some pressure off. SOLIDWORKS Routing is a package that is available with all Premium Licenses.

 

SOLIDWORKS Routing

 

How does it work?

A Route path is driven from a 3D sketch, so what is the software doing in the background? SOLIDWORKS Routing is driven from a database, once you have selected the correct schedule you are using it will automatically pick up the relevant parts to that schedule, for example if you use an edge flange Sch40 all the pipes and elbows will be the same schedule. It then assigns the relevant routing components to the 3D sketch.

How does SOLIDWORKS Routing work?

 

Can I not just use tradition sketching methods to create piping?

Your alternative method to create Pipework would involve using 3D sketches with a series of sweeps and custom made flanges to connect the relevant pipes. Using this method you will not get a bill of materials produced on your drawing with the correct piping information and can add a significant amount of time onto creating your models.

In SOLIDWORKS Routing once you have completed your pipework, you will have the option to output the model into a 2D drawing along with a Bill of materials that will list the correct pipe information i.e. cut lengths of pipes. This option will not be available if you have created it manually. Another advantage is the ability to easily define Spool segments and it will capture the correct detail when brought into a drawing.

SOLIDWORKS Routing has a fantastic ability to auto route between the given routing points, but if for example your route needs to follow a wall you have the option to route along geometry.

Piping

What makes up a routing component?

For a Part to be considered a routing component it needs to contain certain attributes (Route points and Connection points), and these are easily added though the Routing Component wizard for custom parts and are already present in the Design library or any standards you may download through solidworks content. Connect points (C-points) will connect the component to the 3D sketch and Route Points (R-points) define the direction and position that your pipe tube or cable will start.

SOLIDWORKS Routing

Importing P&ID

Engineering projects are rarely run by a single person. For example you are working on a plant layout, the project manager will be able to feed back the locations of the equipment (via a .xml file) SOLIDWORKS is able to automatically route between the components.

SOLIDWORKS Routing - Importing P&ID

 

What’s the difference between the types of routes?

  • Piping – is rigid and often follows straight pipework with 90 or 45 degree elbows to change directions.
  • Tubing – you could imagine a rubber hose, which is controlled by a spline to get free form shapes and routes.
  • Cabling – acts in the same manner as Tubing but is used for electrical.

 

Validation?

If you have previously created your pipe layouts in a 2D format you have no way of finding out if your system will work correctly, another advantage of using SOLIDWORKS Routing is you’re able to run flow simulation on your routes.

SOLIDWORKS Routing - Validation

 

The image above is representing a flow summation run on a basic pipe layout, and has been presented to show areas of high and low pressure, allowing you to modify and validate your piping routes.

By  

About metrosystemadmin

Check Also

Think Backwards with Sweeps

Many years ago (actually 25 years, pre-Quicken), my wife was balancing our checkbook when the battery died in her calculator. She came into my home office and asked to borrow mine, I happily lent it to her. As I expected